[Q-Fireball]

Na so wie ich es verstanden habe, hat er doch kein sound und dafür ist in der Regel ALSA für verantwortlich. Und wenn nicht dann soll er erstmal ALSA installieren

[detructor15]

Zitat (.nano: 11.01.2007, 10:29)

Was genau hat Gnome oder KDE mit ALSA zu tun?

schischa hat dir oben geschrieben, das du 'sudo alsaconf' eingeben musst. Wenn du alsa-base hast, dann muss es den Befehl geben...

*tief durchatme* ich hab gesagt, der erkennt den befehl net (auf gnome übrigens auch nimmer, hab gerad meine mum über telefon dirigiert, sie meinte, da steht das es den befehl net gibt...weder mit kde noch mit gnome)...vllt. fehlen da irgendwelche Dateien (ich lösch gerne sachen mit 6 Jahren meinen 1. pc, 10 GB Platte und das erste was ich gelöscht hatte, war der windows ordner (nahm einfach zuviel platz wech)...hab da also erfahrung^^ vllt. is mir da was von dem alsa zeugs zwischen die finger gekommen...egal jetzt

Zitat

Na so wie ich es verstanden habe, hat er doch kein sound und dafür ist in der Regel ALSA für verantwortlich. Und wenn nicht dann soll er erstmal ALSA installieren

einer hats wenigstens Begriffen^^ dann sag mal wie ich das machen soll...einfach synaptic (oder apt) und dann nach alsa suchen?

Dieser Beitrag wurde von detructor15 bearbeitet: 11. Januar 2007 - 14:56

[ph030]

Zitat

*tief durchatme*

++ + verdammt, es kann doch net so schwierig sein

Zitat

[#][~] equery b /usr/sbin/alsaconf
[ Searching for file(s) /usr/sbin/alsaconf in *... ]
media-sound/alsa-utils-1.0.14_rc1 (/usr/sbin/alsaconf)

Man beachte das "#", das "sbin" und v.a., dass ich oben schon alsa-utils und root geschrieben hab.

Zitat

ich lösch gerne sachen

Danke für den Stempel, werd's entsprechend einordnen.

ppl +=1,
ph

Dieser Beitrag wurde von ph030 bearbeitet: 11. Januar 2007 - 15:52

[detructor15]

so, ich hab das jetz installiert (alsa-base), und genau das gemacht was du geschrieben hast und er sagt mir schon bei equery "command not found" und "alsaconf" gibts auch net...

Dieser Beitrag wurde von detructor15 bearbeitet: 11. Januar 2007 - 18:01

[blob]

Achtung:

Ab Kernel 2.6.18 braucht man alsa nicht mehr installieren, es ist im Kernel.

Das wesentliche Paket ist alsa-driver .

Was hast du denn für eine distro ?

[Q-Fireball]

Hihi hier geht es ja zu wie auf einem Basar, also er biete alsa Installation sucht alsaconfig

Ja ich glaube die Distribution hat er schon genannt und das soll unbuntu sein, wenn dem so ist dann bitte immer sudu vorher eintippen sonnst kannst du die Hilfe hier eh knicken z.B. sudo alsaconfig.

[blob]

(er braucht doch gar keinen sound, der computer läuft doch schon sehr gut ohne)

[detructor15]

ubuntu/edgy, iw das ich sudo eingeben muss^^
@blob schon, aber 1. ohne mukke is langweilig und 2. hast du schonmal cs:s ohne sound gezockt? da messert dich jeder -.- außerdem komm ich da auch net in die optionen (der hängt sich auf) ich denke das liegt am soundtreiber

bei synaptic find ich kein alsa-driver package -.-

so, hab mir jetz alsamixer geladen, wenn ich jetz "alsamixer" eingeb kommt das hier "alsamixer: function snd_ctl_open failed for default: No such device"

Dieser Beitrag wurde von detructor15 bearbeitet: 11. Januar 2007 - 18:39

[Q-Fireball]

@detructor15
Aber du weist schon das Linux nicht gerade das Spiele OS ist?! Davon abgesehen wieso nutzt du die ubuntu Community nicht. Ich will dich nicht weck ekeln oder so, aber dort gibt es sicherlich für deine Distribution direktere Hilfe!

[.nano]

Nun, ist normal, dass sich alle erst hier melden, obwohl die ja als riesig bezeichnete Ubuntu-Community so umfangreich sein soll mit seiner Wiki...

[detructor15]

hmmm...könnte ich, will ich aber net, hier fühl ich mich wohler^^ nich ganz so...unerfahren^^
achja, ich hab jetz mal mit gnome gestartet, und siehe da, er hat meine soundkarte, behauptet aber sie wäre net verbunden, (wenn ich auf "test sound" drück, kommt "audiotestsrc wave=sine freq=512 ! audioconvert !
audioresample ! gconfaudiosink: KOntte die Ressource nicht zum Schreiben öffnen."
ich denke das sagt euch mehr als mir^

[Q-Fireball]

Eh .nano hast du mal geguckt? Die schreiben wirklich fast eine wiki

Hmm ich weis immer noch nicht ob dein Kernel deine Karte erkannt hat. Hast du mal die dmesg Ausgabe, ich weis vielleicht nerve ich schon damit, aber das benutze ich häufiger!
Hmm sorry das hilft auch nicht, wenn du das nicht in den Kernel eingebunden hast. Na dann mache mal ein modprobe -l und lade das Modul, wenn du eins hast

Außerdem ist dein ubuntu extrem komisch normalerweise hat man nach dem installieren immer eine gnome Oberfläche! Was hast du mit deiner Distri gemacht?!

Dieser Beitrag wurde von Q-Fireball bearbeitet: 11. Januar 2007 - 19:11

[detructor15]

normalerweise hab ich kde


das aber lang

[17179569.184000] Linux version 2.6.17-10-generic (root@terranova) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 SMP Tue Dec 5 22:28:26 UTC 2006 (Ubuntu 2.6.17-10.34-generic)
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000]  BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[17179569.184000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[17179569.184000]  BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
[17179569.184000]  BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
[17179569.184000]  BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
[17179569.184000] 127MB HIGHMEM available.
[17179569.184000] 896MB LOWMEM available.
[17179569.184000] On node 0 totalpages: 262128
[17179569.184000]   DMA zone: 4096 pages, LIFO batch:0
[17179569.184000]   Normal zone: 225280 pages, LIFO batch:31
[17179569.184000]   HighMem zone: 32752 pages, LIFO batch:7
[17179569.184000] DMI 2.3 present.
[17179569.184000] ACPI: RSDP (v000 Nvidia                                ) @ 0x000f73a0
[17179569.184000] ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3000
[17179569.184000] ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3040
[17179569.184000] ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff7700
[17179569.184000] ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x4008
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 6:10 APIC version 16
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[17179569.184000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[17179569.184000] ACPI: BIOS IRQ0 pin2 override ignored.
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[17179569.184000] ACPI: IRQ9 used by override.
[17179569.184000] ACPI: IRQ14 used by override.
[17179569.184000] ACPI: IRQ15 used by override.
[17179569.184000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 50000000 (gap: 40000000:c0000000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/hdb1 ro quiet splash
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Enabling fast FPU save and restore... done.
[17179569.184000] Enabling unmasked SIMD FPU exception support... done.
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[17179569.184000] Detected 2037.829 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179571.120000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[17179571.120000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179571.148000] Memory: 1029636k/1048512k available (1910k kernel code, 18096k reserved, 1069k data, 308k init, 131008k highmem)
[17179571.148000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179571.228000] Calibrating delay using timer specific routine.. 4079.98 BogoMIPS (lpj=8159977)
[17179571.228000] Security Framework v1.0.0 initialized
[17179571.228000] SELinux:  Disabled at boot.
[17179571.228000] Mount-cache hash table entries: 512
[17179571.228000] CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
[17179571.228000] CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
[17179571.228000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[17179571.228000] CPU: L2 Cache: 512K (64 bytes/line)
[17179571.228000] CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000
[17179571.228000] Checking 'hlt' instruction... OK.
[17179571.244000] SMP alternatives: switching to UP code
[17179571.244000] Freeing SMP alternatives: 16k freed
[17179571.244000] checking if image is initramfs... it is
[17179571.684000] Freeing initrd memory: 5323k freed
[17179571.684000] ACPI: Core revision 20060707
[17179571.692000] ACPI: Looking for DSDT ... not found!
[17179571.692000] CPU0: AMD Athlon™ XP 2600+ stepping 00
[17179571.692000] Total of 1 processors activated (4079.98 BogoMIPS).
[17179571.692000] ENABLING IO-APIC IRQs
[17179571.692000] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[17179571.836000] Brought up 1 CPUs
[17179571.836000] migration_cost=0
[17179571.836000] NET: Registered protocol family 16
[17179571.836000] EISA bus registered
[17179571.836000] ACPI: bus type pci registered
[17179571.852000] PCI: PCI BIOS revision 2.10 entry at 0xfbbd0, last bus=2
[17179571.852000] PCI: Using configuration type 1
[17179571.852000] Setting up standard PCI resources
[17179571.864000] ACPI: Interpreter enabled
[17179571.864000] ACPI: Using IOAPIC for interrupt routing
[17179571.864000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179571.864000] PCI: Probing PCI hardware (bus 00)
[17179571.868000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:09.0
[17179571.872000] Boot video device is 0000:02:00.0
[17179571.872000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179571.932000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[17179571.932000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
[17179571.932000] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[17179571.932000] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 11 *12 14 15)
[17179571.932000] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[17179571.932000] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[17179571.936000] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[17179571.936000] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 10 11 *12 14 15)
[17179571.936000] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[17179571.936000] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[17179571.936000] ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[17179571.936000] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[17179571.936000] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[17179571.936000] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[17179571.936000] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[17179571.936000] ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[17179571.936000] ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[17179571.936000] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[17179571.940000] ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
[17179571.940000] ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
[17179571.940000] ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
[17179571.940000] ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.
[17179571.940000] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
[17179571.940000] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled.
[17179571.940000] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled.
[17179571.940000] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled.
[17179571.940000] ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
[17179571.940000] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled.
[17179571.940000] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
[17179571.944000] ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled.
[17179571.944000] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled.
[17179571.944000] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
[17179571.944000] ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
[17179571.944000] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
[17179571.948000] Linux Plug and Play Support v0.97 © Adam Belay
[17179571.948000] pnp: PnP ACPI init
[17179571.952000] pnp: PnP ACPI: found 13 devices
[17179571.952000] PnPBIOS: Disabled by ACPI PNP
[17179571.952000] PCI: Using ACPI for IRQ routing
[17179571.952000] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[17179571.968000] pnp: 00:00: ioport range 0x4000-0x407f could not be reserved
[17179571.968000] pnp: 00:00: ioport range 0x4080-0x40ff has been reserved
[17179571.968000] pnp: 00:00: ioport range 0x4400-0x447f has been reserved
[17179571.968000] pnp: 00:00: ioport range 0x4480-0x44ff could not be reserved
[17179571.968000] pnp: 00:00: ioport range 0x4200-0x427f has been reserved
[17179571.968000] pnp: 00:00: ioport range 0x4280-0x42ff has been reserved
[17179571.968000] pnp: 00:01: ioport range 0x5000-0x503f has been reserved
[17179571.968000] pnp: 00:01: ioport range 0x5040-0x507f has been reserved
[17179571.968000] PCI: Bridge: 0000:00:08.0
[17179571.968000]   IO window: 9000-9fff
[17179571.968000]   MEM window: disabled.
[17179571.968000]   PREFETCH window: disabled.
[17179571.968000] PCI: Bridge: 0000:00:1e.0
[17179571.968000]   IO window: a000-afff
[17179571.968000]   MEM window: e4000000-e5ffffff
[17179571.968000]   PREFETCH window: c0000000-dfffffff
[17179571.968000] PCI: Setting latency timer of device 0000:00:08.0 to 64
[17179571.968000] NET: Registered protocol family 2
[17179572.008000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[17179572.008000] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[17179572.008000] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[17179572.008000] TCP: Hash tables configured (established 131072 bind 65536)
[17179572.008000] TCP reno registered
[17179572.008000] audit: initializing netlink socket (disabled)
[17179572.008000] audit(1168533880.008:1): initialized
[17179572.008000] highmem bounce pool size: 64 pages
[17179572.008000] VFS: Disk quotas dquot_6.5.1
[17179572.008000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179572.008000] Initializing Cryptographic API
[17179572.008000] io scheduler noop registered
[17179572.008000] io scheduler anticipatory registered
[17179572.008000] io scheduler deadline registered
[17179572.008000] io scheduler cfq registered (default)
[17179572.008000] isapnp: Scanning for PnP cards...
[17179572.368000] isapnp: No Plug & Play device found
[17179572.388000] Real Time Clock Driver v1.12ac
[17179572.388000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[17179572.388000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179572.388000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[17179572.388000] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179572.388000] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[17179572.392000] mice: PS/2 mouse device common for all mice
[17179572.392000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179572.392000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179572.392000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179572.392000] PNP: No PS/2 controller found. Probing ports directly.
[17179572.392000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179572.392000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179572.392000] EISA: Probing bus 0 at eisa.0
[17179572.392000] Cannot allocate resource for EISA slot 4
[17179572.392000] Cannot allocate resource for EISA slot 5
[17179572.392000] EISA: Detected 0 cards.
[17179572.392000] TCP bic registered
[17179572.392000] NET: Registered protocol family 1
[17179572.392000] NET: Registered protocol family 8
[17179572.392000] NET: Registered protocol family 20
[17179572.392000] Using IPI No-Shortcut mode
[17179572.392000] ACPI: (supports S0 S1 S4 S5)
[17179572.392000] Freeing unused kernel memory: 308k freed
[17179573.508000] Capability LSM initialized
[17179573.536000] ACPI: Fan [FAN] (on)
[17179573.544000] ACPI: Thermal Zone [THRM] (24 C)
[17179573.840000] SCSI subsystem initialized
[17179573.840000] libata version 1.20 loaded.
[17179573.844000] NFORCE2: IDE controller at PCI slot 0000:00:09.0
[17179573.844000] NFORCE2: chipset revision 162
[17179573.844000] NFORCE2: not 100% native mode: will probe irqs later
[17179573.844000] NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
[17179573.844000] NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller
[17179573.844000]     ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
[17179573.844000]     ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
[17179573.844000] Probing IDE interface ide0...
[17179574.360000] hdb: Maxtor 6Y120L0, ATA DISK drive
[17179574.420000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179574.424000] Probing IDE interface ide1...
[17179575.164000] hdc: AOPEN DVD1648/AAP, ATAPI CD/DVD-ROM drive
[17179575.952000] hdd: AOPEN CD-RW CRW5232 1.03 20031013, ATAPI CD/DVD-ROM drive
[17179576.012000] ide1 at 0x170-0x177,0x376 on irq 15
[17179576.020000] hdb: max request size: 128KiB
[17179576.032000] hdb: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(133)
[17179576.032000] hdb: cache flushes supported
[17179576.032000]  hdb: hdb1 hdb2 hdb3 hdb4
[17179576.056000] hdc: ATAPI 17X DVD-ROM drive, 256kB Cache, UDMA(33)
[17179576.056000] Uniform CD-ROM driver Revision: 3.20
[17179576.076000] hdd: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
[17179576.344000] usbcore: registered new driver usbfs
[17179576.344000] usbcore: registered new driver hub
[17179576.376000] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
[17179576.376000] ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 22 (level, high) -> IRQ 177
[17179576.376000] PCI: Setting latency timer of device 0000:00:02.2 to 64
[17179576.376000] ehci_hcd 0000:00:02.2: EHCI Host Controller
[17179576.376000] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
[17179576.376000] ehci_hcd 0000:00:02.2: debug port 1
[17179576.376000] PCI: cache line size of 64 is not supported by device 0000:00:02.2
[17179576.376000] ehci_hcd 0000:00:02.2: irq 177, io mem 0xe6000000
[17179576.376000] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179576.376000] usb usb1: configuration #1 chosen from 1 choice
[17179576.376000] hub 1-0:1.0: USB hub found
[17179576.376000] hub 1-0:1.0: 6 ports detected
[17179576.380000] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[17179576.492000] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21
[17179576.492000] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 21 (level, high) -> IRQ 185
[17179576.492000] PCI: Setting latency timer of device 0000:00:02.0 to 64
[17179576.492000] ohci_hcd 0000:00:02.0: OHCI Host Controller
[17179576.492000] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[17179576.524000] ohci_hcd 0000:00:02.0: irq 185, io mem 0xe6004000
[17179576.584000] usb usb2: configuration #1 chosen from 1 choice
[17179576.584000] hub 2-0:1.0: USB hub found
[17179576.584000] hub 2-0:1.0: 3 ports detected
[17179576.692000] ACPI: PCI Interrupt Link [APCG] enabled at IRQ 20
[17179576.692000] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCG] -> GSI 20 (level, high) -> IRQ 193
[17179576.692000] PCI: Setting latency timer of device 0000:00:02.1 to 64
[17179576.692000] ohci_hcd 0000:00:02.1: OHCI Host Controller
[17179576.692000] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
[17179576.720000] ohci_hcd 0000:00:02.1: irq 193, io mem 0xe6005000
[17179576.728000] usb 1-4: new high speed USB device using ehci_hcd and address 2
[17179576.780000] usb usb3: configuration #1 chosen from 1 choice
[17179576.780000] hub 3-0:1.0: USB hub found
[17179576.780000] hub 3-0:1.0: 3 ports detected
[17179576.876000] usb 1-4: configuration #1 chosen from 1 choice
[17179576.876000] hub 1-4:1.0: USB hub found
[17179576.876000] hub 1-4:1.0: 4 ports detected
[17179577.056000] Attempting manual resume
[17179577.096000] kjournald starting.  Commit interval 5 seconds
[17179577.096000] EXT3-fs: mounted filesystem with ordered data mode.
[17179577.168000] ohci_hcd 0000:00:02.0: wakeup
[17179577.476000] usb 1-4.2: new low speed USB device using ehci_hcd and address 4
[17179577.592000] usb 1-4.2: configuration #1 chosen from 1 choice
[17179577.816000] usb 1-4.4: new low speed USB device using ehci_hcd and address 5
[17179577.928000] usb 1-4.4: configuration #1 chosen from 1 choice
[17179578.232000] usb 2-3: new full speed USB device using ohci_hcd and address 2
[17179578.452000] usb 2-3: configuration #1 chosen from 1 choice
[17179580.904000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179580.904000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179580.968000] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.54.
[17179580.968000] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
[17179580.968000] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCH] -> GSI 22 (level, high) -> IRQ 177
[17179580.968000] PCI: Setting latency timer of device 0000:00:04.0 to 64
[17179581.492000] eth0: forcedeth.c: subsystem: 01462:570c bound to 0000:00:04.0
[17179581.792000] Linux agpgart interface v0.101 © Dave Jones
[17179581.868000] agpgart: Detected NVIDIA nForce2 chipset
[17179581.872000] agpgart: AGP aperture is 64M @ 0xe0000000
[17179581.976000] input: PC Speaker as /class/input/input0
[17179582.040000] parport: PnPBIOS parport detected.
[17179582.040000] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[17179582.076000] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x5000
[17179582.076000] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x5040
[17179582.160000] eth0: no link during initialization.
[17179582.232000] FDC 0 is a post-1991 82077
[17179582.232000] usbcore: registered new driver hiddev
[17179582.260000] input: Mega World USB Game Controllers as /class/input/input1
[17179582.260000] input: USB HID v1.10 Joystick [Mega World USB Game Controllers] on usb-0000:00:02.2-4.2
[17179582.264000] input: Logitech Logitech USB Keyboard as /class/input/input2
[17179582.264000] input: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:02.2-4.4
[17179582.272000] input: Logitech Logitech USB Keyboard as /class/input/input3
[17179582.272000] input: USB HID v1.10 Device [Logitech Logitech USB Keyboard] on usb-0000:00:02.2-4.4
[17179582.284000] input: Logitech USB Gaming Mouse as /class/input/input4
[17179582.284000] input: USB HID v1.11 Mouse [Logitech USB Gaming Mouse] on usb-0000:00:02.0-3
[17179582.316000] hiddev96: USB HID v1.11 Device [Logitech USB Gaming Mouse] on usb-0000:00:02.0-3
[17179582.316000] usbcore: registered new driver usbhid
[17179582.316000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[17179582.332000] ts: Compaq touchscreen protocol output
[17179582.932000] lp0: using parport0 (interrupt-driven).
[17179582.952000] Adding 1542232k swap on /dev/disk/by-uuid/fb23c802-b01b-4f69-a8bf-bc5f09205461.  Priority:-1 extents:1 across:1542232k
[17179583.028000] EXT3 FS on hdb1, internal journal
[17179583.236000] NET: Registered protocol family 17
[17179584.096000] eth0: link up.
[17179596.372000] hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
[17179596.372000] hdb: dma_intr: error=0x40 { UncorrectableError }, LBAsect=147727876, sector=147727734
[17179596.372000] ide: failed opcode was: unknown
[17179596.372000] end_request: I/O error, dev hdb, sector 147727734
[17179596.372000] Buffer I/O error on device hdb4, logical block 14352576
[17179597.764000] hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
[17179597.764000] hdb: dma_intr: error=0x40 { UncorrectableError }, LBAsect=147727876, sector=147727738
[17179597.764000] ide: failed opcode was: unknown
[17179597.764000] end_request: I/O error, dev hdb, sector 147727738
[17179597.764000] Buffer I/O error on device hdb4, logical block 14352577
[17179599.156000] hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
[17179599.156000] hdb: dma_intr: error=0x40 { UncorrectableError }, LBAsect=147727876, sector=147727742
[17179599.156000] ide: failed opcode was: unknown
[17179599.156000] end_request: I/O error, dev hdb, sector 147727742
[17179599.156000] Buffer I/O error on device hdb4, logical block 14352578
[17179600.536000] hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
[17179600.536000] hdb: dma_intr: error=0x40 { UncorrectableError }, LBAsect=147727876, sector=147727746
[17179600.536000] ide: failed opcode was: unknown
[17179600.536000] end_request: I/O error, dev hdb, sector 147727746
[17179600.536000] Buffer I/O error on device hdb4, logical block 14352579
[17179601.932000] hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
[17179601.932000] hdb: dma_intr: error=0x40 { UncorrectableError }, LBAsect=147727876, sector=147727750
[17179601.932000] ide: failed opcode was: unknown
[17179601.932000] end_request: I/O error, dev hdb, sector 147727750
[17179601.932000] Buffer I/O error on device hdb4, logical block 14352580
[17179603.324000] hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
[17179603.324000] hdb: dma_intr: error=0x40 { UncorrectableError }, LBAsect=147727876, sector=147727754
[17179603.324000] ide: failed opcode was: unknown
[17179603.324000] end_request: I/O error, dev hdb, sector 147727754
[17179603.324000] Buffer I/O error on device hdb4, logical block 14352581
[17179604.740000] hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
[17179604.740000] hdb: dma_intr: error=0x40 { UncorrectableError }, LBAsect=147727876, sector=147727758
[17179604.740000] ide: failed opcode was: unknown
[17179604.740000] end_request: I/O error, dev hdb, sector 147727758
[17179604.740000] Buffer I/O error on device hdb4, logical block 14352582
[17179606.084000] hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
[17179606.084000] hdb: dma_intr: error=0x40 { UncorrectableError }, LBAsect=147727876, sector=147727762
[17179606.084000] ide: failed opcode was: unknown
[17179606.084000] end_request: I/O error, dev hdb, sector 147727762
[17179606.084000] Buffer I/O error on device hdb4, logical block 14352583
[17179607.428000] hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
[17179607.428000] hdb: dma_intr: error=0x40 { UncorrectableError }, LBAsect=147727876, sector=147727766
[17179607.428000] ide: failed opcode was: unknown
[17179607.428000] end_request: I/O error, dev hdb, sector 147727766
[17179607.428000] Buffer I/O error on device hdb4, logical block 14352584
[17179608.772000] hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
[17179608.772000] hdb: dma_intr: error=0x40 { UncorrectableError }, LBAsect=147727876, sector=147727770
[17179608.772000] ide: failed opcode was: unknown
[17179608.772000] end_request: I/O error, dev hdb, sector 147727770
[17179608.772000] Buffer I/O error on device hdb4, logical block 14352585
[17179610.112000] hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
[17179610.112000] hdb: dma_intr: error=0x40 { UncorrectableError }, LBAsect=147727876, sector=147727774
[17179610.112000] ide: failed opcode was: unknown
[17179610.112000] end_request: I/O error, dev hdb, sector 147727774
[17179610.112000] Buffer I/O error on device hdb4, logical block 14352586
[17179611.452000] hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
[17179611.452000] hdb: dma_intr: error=0x40 { UncorrectableError }, LBAsect=147727876, sector=147727778
[17179611.452000] ide: failed opcode was: unknown
[17179611.452000] end_request: I/O error, dev hdb, sector 147727778
[17179611.452000] Buffer I/O error on device hdb4, logical block 14352587
[17179612.792000] hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
[17179612.792000] hdb: dma_intr: error=0x40 { UncorrectableError }, LBAsect=147727876, sector=147727782
[17179612.792000] ide: failed opcode was: unknown
[17179612.792000] end_request: I/O error, dev hdb, sector 147727782
[17179612.792000] Buffer I/O error on device hdb4, logical block 14352588
[17179614.140000] hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
[17179614.140000] hdb: dma_intr: error=0x40 { UncorrectableError }, LBAsect=147727876, sector=147727786
[17179614.140000] ide: failed opcode was: unknown
[17179614.140000] end_request: I/O error, dev hdb, sector 147727786
[17179615.480000] hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
[17179615.480000] hdb: dma_intr: error=0x40 { UncorrectableError }, LBAsect=147727876, sector=147727790
[17179615.480000] ide: failed opcode was: unknown
[17179615.480000] end_request: I/O error, dev hdb, sector 147727790
[17179616.824000] hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
[17179616.824000] hdb: dma_intr: error=0x40 { UncorrectableError }, LBAsect=147727876, sector=147727794
[17179616.824000] ide: failed opcode was: unknown
[17179616.824000] end_request: I/O error, dev hdb, sector 147727794
[17179616.824000] printk: 2 messages suppressed.
[17179616.824000] Buffer I/O error on device hdb4, logical block 14352591
[17179618.172000] hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
[17179618.172000] hdb: dma_intr: error=0x40 { UncorrectableError }, LBAsect=147727876, sector=147727798
[17179618.172000] ide: failed opcode was: unknown
[17179618.172000] end_request: I/O error, dev hdb, sector 147727798
[17179619.520000] hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
[17179619.520000] hdb: dma_intr: error=0x40 { UncorrectableError }, LBAsect=147727876, sector=147727802
[17179619.520000] ide: failed opcode was: unknown
[17179619.520000] end_request: I/O error, dev hdb, sector 147727802
[17179620.872000] hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
[17179620.876000] hdb: dma_intr: error=0x40 { UncorrectableError }, LBAsect=147727876, sector=147727806
[17179620.876000] ide: failed opcode was: unknown
[17179620.876000] end_request: I/O error, dev hdb, sector 147727806
[17179622.224000] hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
[17179622.224000] hdb: dma_intr: error=0x40 { UncorrectableError }, LBAsect=147727876, sector=147727810
[17179622.224000] ide: failed opcode was: unknown
[17179622.224000] end_request: I/O error, dev hdb, sector 147727810
[17179622.224000] printk: 3 messages suppressed.
[17179622.224000] Buffer I/O error on device hdb4, logical block 14352595
[17179623.580000] hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
[17179623.580000] hdb: dma_intr: error=0x40 { UncorrectableError }, LBAsect=147727876, sector=147727814
[17179623.580000] ide: failed opcode was: unknown
[17179623.580000] end_request: I/O error, dev hdb, sector 147727814
[17179624.936000] hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
[17179624.936000] hdb: dma_intr: error=0x40 { UncorrectableError }, LBAsect=147727876, sector=147727818
[17179624.936000] ide: failed opcode was: unknown
[17179624.936000] end_request: I/O error, dev hdb, sector 147727818
[17179626.284000] hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
[17179626.284000] hdb: dma_intr: error=0x40 { UncorrectableError }, LBAsect=147727876, sector=147727822
[17179626.284000] ide: failed opcode was: unknown
[17179626.284000] end_request: I/O error, dev hdb, sector 147727822
[17179627.636000] hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
[17179627.636000] hdb: dma_intr: error=0x40 { UncorrectableError }, LBAsect=147727876, sector=147727826
[17179627.636000] ide: failed opcode was: unknown
[17179627.636000] end_request: I/O error, dev hdb, sector 147727826
[17179627.636000] printk: 3 messages suppressed.
[17179627.636000] Buffer I/O error on device hdb4, logical block 14352599
[17179628.976000] hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
[17179628.976000] hdb: dma_intr: error=0x40 { UncorrectableError }, LBAsect=147727876, sector=147727830
[17179628.976000] ide: failed opcode was: unknown
[17179628.976000] end_request: I/O error, dev hdb, sector 147727830
[17179630.324000] hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
[17179630.324000] hdb: dma_intr: error=0x40 { UncorrectableError }, LBAsect=147727876, sector=147727834
[17179630.324000] ide: failed opcode was: unknown
[17179630.324000] end_request: I/O error, dev hdb, sector 147727834
[17179631.660000] hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
[17179631.660000] hdb: dma_intr: error=0x40 { UncorrectableError }, LBAsect=147727876, sector=147727838
[17179631.660000] ide: failed opcode was: unknown
[17179631.660000] end_request: I/O error, dev hdb, sector 147727838
[17179631.660000] printk: 2 messages suppressed.
[17179631.660000] Buffer I/O error on device hdb4, logical block 14352602
[17179633.016000] hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
[17179633.016000] hdb: dma_intr: error=0x40 { UncorrectableError }, LBAsect=147727876, sector=147727842
[17179633.016000] ide: failed opcode was: unknown
[17179633.016000] end_request: I/O error, dev hdb, sector 147727842
[17179634.372000] hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
[17179634.372000] hdb: dma_intr: error=0x40 { UncorrectableError }, LBAsect=147727876, sector=147727846
[17179634.372000] ide: failed opcode was: unknown
[17179634.372000] end_request: I/O error, dev hdb, sector 147727846
[17179635.732000] hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
[17179635.732000] hdb: dma_intr: error=0x40 { UncorrectableError }, LBAsect=147727876, sector=147727850
[17179635.732000] ide: failed opcode was: unknown
[17179635.732000] end_request: I/O error, dev hdb, sector 147727850
[17179637.076000] hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
[17179637.076000] hdb: dma_intr: error=0x40 { UncorrectableError }, LBAsect=147727876, sector=147727854
[17179637.076000] ide: failed opcode was: unknown
[17179637.076000] end_request: I/O error, dev hdb, sector 147727854
[17179637.076000] printk: 3 messages suppressed.
[17179637.076000] Buffer I/O error on device hdb4, logical block 14352606
[17179638.424000] hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
[17179638.424000] hdb: dma_intr: error=0x40 { UncorrectableError }, LBAsect=147727876, sector=147727858
[17179638.424000] ide: failed opcode was: unknown
[17179638.424000] end_request: I/O error, dev hdb, sector 147727858
[17179639.768000] hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
[17179639.768000] hdb: dma_intr: error=0x40 { UncorrectableError }, LBAsect=147727876, sector=147727862
[17179639.768000] ide: failed opcode was: unknown
[17179639.768000] end_request: I/O error, dev hdb, sector 147727862
[17179641.116000] hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
[17179641.116000] hdb: dma_intr: error=0x40 { UncorrectableError }, LBAsect=147727876, sector=147727866
[17179641.116000] ide: failed opcode was: unknown
[17179641.116000] end_request: I/O error, dev hdb, sector 147727866
[17179642.472000] hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
[17179642.472000] hdb: dma_intr: error=0x40 { UncorrectableError }, LBAsect=147727876, sector=147727870
[17179642.472000] ide: failed opcode was: unknown
[17179642.472000] end_request: I/O error, dev hdb, sector 147727870
[17179642.472000] printk: 3 messages suppressed.
[17179642.472000] Buffer I/O error on device hdb4, logical block 14352610
[17179643.832000] hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
[17179643.832000] hdb: dma_intr: error=0x40 { UncorrectableError }, LBAsect=147727876, sector=147727874
[17179643.832000] ide: failed opcode was: unknown
[17179643.832000] end_request: I/O error, dev hdb, sector 147727874
[17179662.800000] kjournald starting.  Commit interval 5 seconds
[17179662.800000] EXT3-fs warning: mounting fs with errors, running e2fsck is recommended
[17179662.808000] EXT3 FS on hdb4, internal journal
[17179662.808000] EXT3-fs: mounted filesystem with ordered data mode.
[17179662.840000] kjournald starting.  Commit interval 5 seconds
[17179662.848000] EXT3 FS on hdb3, internal journal
[17179662.848000] EXT3-fs: mounted filesystem with ordered data mode.
[17179671.780000] ACPI: Power Button (FF) [PWRF]
[17179671.780000] ACPI: Power Button (CM) [PWRB]
[17179671.896000] ibm_acpi: ec object not found
[17179671.924000] pcc_acpi: loading...
[17179675.020000] fglrx: module license 'Proprietary. © 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[17179675.020000] [fglrx] Maximum main memory to use for locked dma buffers: 929 MBytes.
[17179675.020000] [fglrx] module loaded - fglrx 8.32.5 [Dec 12 2006] on minor 0
[17179675.264000] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[17179675.264000] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [APC4] -> GSI 19 (level, high) -> IRQ 201
[17179677.780000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[17179677.780000] apm: overridden by ACPI.
[17179678.616000] [fglrx] Internal AGP support requested, but kernel AGP support active.
[17179678.616000] [fglrx] Have to use kernel AGP support to avoid conflicts.
[17179678.616000] [fglrx] AGP detected, AgpState   = 0x1f00421b (hardware caps of chipset)
[17179678.620000] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[17179678.620000] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[17179678.620000] agpgart: Putting AGP V3 device at 0000:02:00.0 into 8x mode
[17179678.620000] [fglrx] AGP enabled,  AgpCommand = 0x1f004312 (selected caps)
[17179678.628000] [fglrx] total      GART = 67108864
[17179678.628000] [fglrx] free       GART = 51113984
[17179678.628000] [fglrx] max single GART = 51113984
[17179678.628000] [fglrx] total      LFB  = 134217728
[17179678.628000] [fglrx] free       LFB  = 116387840
[17179678.628000] [fglrx] max single LFB  = 116387840
[17179678.628000] [fglrx] total      Inv  = 0
[17179678.628000] [fglrx] free       Inv  = 0
[17179678.628000] [fglrx] max single Inv  = 0
[17179678.628000] [fglrx] total      TIM  = 0
[17179683.076000] Bluetooth: Core ver 2.8
[17179683.076000] NET: Registered protocol family 31
[17179683.076000] Bluetooth: HCI device and connection manager initialized
[17179683.076000] Bluetooth: HCI socket layer initialized
[17179683.100000] Bluetooth: L2CAP ver 2.8
[17179683.100000] Bluetooth: L2CAP socket layer initialized
[17179683.136000] Bluetooth: RFCOMM socket layer initialized
[17179683.136000] Bluetooth: RFCOMM TTY layer initialized
[17179683.136000] Bluetooth: RFCOMM ver 1.7
[17179683.248000] NET: Registered protocol family 10
[17179683.248000] lo: Disabled Privacy Extensions
[17179683.248000] IPv6 over IPv4 tunneling driver
[17179693.316000] eth0: no IPv6 routers present
[17179711.416000] ISO 9660 Extensions: Microsoft Joliet Level 1
[17179711.476000] ISOFS: changing to secondary root
[17183831.908000] [fglrx] Internal AGP support requested, but kernel AGP support active.
[17183831.908000] [fglrx] Have to use kernel AGP support to avoid conflicts.
[17183831.908000] [fglrx] AGP detected, AgpState   = 0x1f00421b (hardware caps of chipset)
[17183831.908000] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[17183831.908000] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[17183831.908000] agpgart: Putting AGP V3 device at 0000:02:00.0 into 8x mode
[17183831.908000] [fglrx] AGP enabled,  AgpCommand = 0x1f004312 (selected caps)
[17183831.916000] [fglrx] total      GART = 67108864
[17183831.916000] [fglrx] free       GART = 51113984
[17183831.916000] [fglrx] max single GART = 51113984
[17183831.916000] [fglrx] total      LFB  = 134217728
[17183831.916000] [fglrx] free       LFB  = 116387840
[17183831.916000] [fglrx] max single LFB  = 116387840
[17183831.916000] [fglrx] total      Inv  = 0
[17183831.916000] [fglrx] free       Inv  = 0
[17183831.916000] [fglrx] max single Inv  = 0
[17183831.916000] [fglrx] total      TIM  = 0

Dieser Beitrag wurde von ShadowHunter bearbeitet: 12. Januar 2007 - 15:29

[blob]

Über die soundcard steht da nichts, nur dass deine harddiskLesefehler hat, und (an den Steckern an der Seite) falsch als slave statt als master gestöpselt ist ...

In dem ziemlich alten Kernel ist alsa noch nicht drin. Wenn du es nicht nachladbar findest, entweder einen neueren Kernel nachladen, oder eine andere Distro installieren

Dieser Beitrag wurde von blob bearbeitet: 11. Januar 2007 - 19:52

[detructor15]

lol, für die festplatte hab ich keine jumper^^ is auch egal
ziemlich alter kernel? nen neueren gibts net
und alsa is da drin ist doch irgendwas mit linux architecture
und meine soundkarte hat mal gefunzt...aber jetz will er sie nimmer... -.-
und was sind das für harddisk fehler (hab ich beim hochfahren, das er da irgendwie nen error buffer I/O hat...kp, er fährt trotzdem normal hoch...hast du vllt. package quellen für mich? ich hab nämlich nur die normalen...


maan bitte, gebt mir irgendwas, paketquellen, lösung für mein soundkarten problem...neueren kernel...biiiiiitte

Dieser Beitrag wurde von detructor15 bearbeitet: 11. Januar 2007 - 20:23